Frequently Asked Questions About Our Hot Tub Additives

Anyone who chooses to soak in something natural. Those that may be sensitive to, or those who may have allergic reactions to the toxic chemicals in city water and or additives the hot tub industry promotes.

 A growing and loyal base of holistic-minded customers, people from all walks of life such as Naturopathic doctors, medical doctors, nurses, chiropractors, lawyers, teachers, preachers, blue-collar and white collar all love to soak in the world's best mineral solution for hot tubs.  

4 to 6 months per each new fill up. Some customers add non-chlorine shock oxidizer after heavy use to help the water to return to clarity faster.  

YES! Compared to traditional chemical sanitation routines, it is much less work! 

Pure N Easy needs no PH balancing with city water and you will balance the PH only  once with well water , then add the world’s best mineral solution and you will not have to balance the PH again  for the next 4 - 6 months until the next fill up. 

• One 32 oz bottle treats: 
• 200-gallon hot tub will fill up three times = 18 months of soak time   
• 300-gallon hot tub will fill up twice = 12 months soak time with 2 oz left over 
• 400-gallon 7x7 hot tub will fill up one time with 12 oz unused, (Buy two save $30) will fill up 3 times with 18-24 months soak time 
• 500-gallon 8x8 hot tub one fill with 7oz unused.  (Buy two save $30) will fill 2x= 12-18 months soak time with 14 oz for boost
• Note:  If at 4 months you boost 1 oz per hundred gallons you may extend soaking to 6 months and then to 9 months. 
• Heavy usages of many clothed people add non chlorine shock after soaking. 
• You may want to shower before soaking so you can get out and feel smooth and soft from head to toe.

Not recommended unless your hot tub is dirty from sitting stagnant.   Chlorine can be used once when you fill your hot tub. Add approx.3-5 ppm chlorine.  Either drain and refill. If your refilling an active tub then just treat with Pure N Easy. PNE will completely restructure and purify the water.  Changing the water and changing the way you think about the water you soak in.

Approximately  20-30 minutes for the water to be ready for soaking. 

No. Pure N Easy will not harm you, your clothes, or your spa. 

Natural Ionic mineral water will not have the corrosive properties that toxic chemicals do. The fact that sitting in and or breathing toxic chemicals are not good for you or your spa. Full strength Chemical sanitation methods can be corrosive to the components. 

Pure N Easy treatment works to prevent & eliminate the deposits in your plumbing lines and prevents chemical buildup. 

YES, chemically bleached water is the only water that’s 100% crystal clear. Mineral water in hot tubs sometimes has a very faint tint of brown, gray, or sometimes green. (Similar with white bleached table salt, which is void of most of it's mineral content. Pink table salt and other non bleached salt will always have color due to the mineral content.

YES, you can use Potassium sulfate which is generac Non-chlorine shock for hot tubs,  also known as spa oxidizer.  You may also try the following with Pure N Easy:

• Magnesium sulfate also know as Epsom salt. Dr teals brand has many scents. not too much as the oils may clog the filter but a spoon full occasionally is great
• Hydrogen peroxide H2O2 in place of non-chlorine shock
• Ozone/O3 is common in most new hot tubs and works good with pure N easy

Because they are in the chemical sales business to pay for the store. Pool and spa stores nationally teach EPA guidelines for PUBLIC USE.     Is your hot tub open to the public?

No, it is not cost-effective for those larger volumes of water and pools that require different methods due to the constant exposure to the elements. Pools are a dirt magnet.

It is if you're soaking in man-made synthetic chemicals like chlorine/bromine etc.,  PH is super important then because chlorine/bromine type chemicals are only effective within the PH range.  Outside of the PH range they are caustic to the components of your hot tub and toxic to you.

 Answer.       Pure N Easy purifies water in a Four-part natural process: 

1. Flocculation: When added to water, Pure N Easy causes dissolved, invisible impurities to come out of suspension. 
2. Coagulation: Next, the impurities are neutralized as they clump together and become insoluble. 
3. Precipitation: Once coagulated, the insoluble, neutralized impurities solidify as they precipitate out of the solution. 
4. Deposition: The precipitates settle and are deposited as sediment in the filter.

Answer.     Trademarked since 2012 pure N easy has accumulated millions of operating hours in privately owned hot tubs and swim spas.